Digital Indicator / Controller for Digital Verniers / Micrometers


•Powered by AC or DC power source
• 6 digit seven segment LED display or Back-lit LCD graphics display
• Pass Word facility to access the menus.
• Facility to mask ( or Hide) the menus which are normally not required.
• Peak (Max.) and Valley (Min.) hold facility.
• 5V supply for the interface.
• 0 to 50°C of operating temperature.
• 95% humidity at 40°C.
• Compact size : 48 X 96 X 110 DIN size enclosure OR
96 X 96 X 110 DIN size enclosure OR
OEM kit available without enclosure

Options Available :
All options except Option no.7 and 8 , specified under ‘OPTIONS’ are available.


The Vinyas Microsystems “Digital Indicator/ Controller” is a microcontroller based, versatile instrument.. The instrument is designed to interface with digital verniers and micrometers from manufacturers like mitutoyo etc.
. 230V AC or external DC source can power this instrument.


Input type:

Interface with Digital Verniers / Micrometers 

Excitation Voltage:

5Vdc (±1%)


230V AC, or external DC source

Update Rate:

Programmable from 4 Samples/sec To 100 Samples/sec.

Display Type:

  1. 6 digit 0.56in. Red/Green/Blue/Amber LED display or Back-lit LCD graphics display

Settable Parameters:

 Relay setpoints, relay hysterisis, over range, under range, pass word etc.

Front Panel Keys:

  1. Menu: To scroll through the menus.
  2. Inc:  Increments the displayed menu parameter.
  3. Dec: Decrements the displayed menu parameter.
  4. Enter: Store configuration/Toggle between Peak Valley & Normal mode.

Physical Size(W*H*D):

96X96X110 DIN size or 48X96X110 DIN size OR OEM kit



Enclosure Type:

ABS plastic case

Operating Temp:

0°C to +50°C

Home | About Us | Products | Services | Downloads | Contact Us